Rabu, 31 Maret 2010

TEKNOLOGI PENGOLAHAN AIR INDUSTRI


1. Introduction
2. Physico-chemical Charcterstics of Natural Waters
3. Properties of Water at High Temperatures and Pressures
4. Water Chemistry, Material Compatibility and Corrosion
S. Treatment of Natural Waters for Industrial Cooling
6. Demineralisation by Ion Exchange
7. Water Chemistry in Fossil Fuel Fired Steam
Generating Units
8. Steam Quality Requirements for High Pressure T'lJ'bines
9. Special Problems of Water Chemistry and Material
Compatability in Nuclear Power Stations
10. Geothermal Power and Water Chemistry
11. Analytical Techniques for Water Chemistry Montoring and
Control
12. Desalinati~n, Effluent Treatment and Water Conservation
Jumlah Halaman : 153
Kualitas ebook : Good
Kode : water-001
Harga : Rp 25.000 Read More/Selengkapnya......

Sabtu, 27 Maret 2010

BUILD A REMOTE-CONTROLLED ROBOT


CHAPTER ONE. THE MOTORIZED PLATFORM
CHAPTER TWO. BODY FRAMEWORK
CHAPTER THREE. POWER SUPPLY AND TEMPORARY CONTROL BOX
CHAPTER FOUR. REMOTE CONTROL SYSTEM
CHAPTER FIVE. ARMS AND SUBSYSTEMS
CHAPTER SIX. SKIN AND FINISHING TOUCHES

Jumlah Halaman : 145
Kualitas ebook : Good
Kode : Robotika-003
Harga : Rp 25.000 Read More/Selengkapnya......

Advances in Robot Kinematics: Analysis and Design


SINGULARITY ANALYSIS OF PARALLEL MANIPULATORS
DESIGN OF ROBOTS AND MECHANISMS
MOTION PLANNING AND MOBILITY
PERFORMANCE AND PROPERTIES OF MECHANISMS
MEASURE AND CALIBRATION
KINEMATIC ANALYSIS AND WORKSPACE

Jumlah Halaman : 465
Kualitas ebook : Good
Kode : Robotika-002
Harga : Rp 25.000
Read More/Selengkapnya......

Desain dan mekanisme robotik


1 Introduction: Brief Historical Review and Main Definitions
2 Concepts and Layouts
3 Dynamic Analysis of Drives
4 Kinematics and Control of Automatic Machines
5 Feedback Sensors
6 Transporting Devices
7 Feeding and Orientation Devices
8 Functional Systems and Mechanisms
9 Manipulators

Jumlah Halaman : 444
Kualitas ebook : Good
Kode : Robotika-001
Harga : Rp 35.000
Read More/Selengkapnya......

Manajemen logistik terintegrasi


Part A. Concepts, and Fundamentals of Design of Integral Logistics Management
1 Logistics and Operations Management and Enterprise Performance
2 Strategic Decisions and Business Relationships in a Supply Chain
3 Business Process Analysis and Fundamental Logistics Concepts
4 The MRP II / ERP Concept: Business Processes and Methods
5 The Lean / Just-in-Time Concept and Repetitive Manufacturing
6 Concepts for Product Families and One-of-a-Kind Production
7 Concepts for the Process Industry
8 Logistics Software
Part B. Methods of Planning & Control in Complex Logistics Systems
9 Demand and Demand Forecast
10 Inventory Management and Stochastic Materials Management
11 Deterministic Materials Management
12 Time Management and Scheduling
13 Capacity Management
14 Order Release and Control
15 Cost Estimating, Job-Order Costing, and Activity-Based Costing
16 Representation and System Management of Logistic Objects
Part C. Overview of Further Management Systems in the Enterprise
17 Quality Management ñ TQM and Six Sigma
18 Systems Engineering and Project Management

Jumlah Halaman : 1065
Kualitas ebook : Good
Kode : Logistik-002
Harga : Rp 30.000

Read More/Selengkapnya......

Perencanaan dan pengontrolan sistem logistik


1 Introducing Logistics Systems
2 Forecasting Logistics Requirements
3 Designing the Logistics Network
4 Solving Inventory Management Problems
5 Designing and Operating aWarehouse
6 Planning and Managing Long-Haul Freight Transportation
7 Planning and Managing Short-Haul Freight Transportation
8 Linking Theory to Practice
Jumlah Halaman : 240
Kualitas ebook : Good
Kode : Logistik-001
Harga : Rp. 30.000 Read More/Selengkapnya......

Mekanika Fluida dan Machinery


1 Physical Properties of Fluids
2 Pressure Distribution in Fluids
3 Forces on Surfaces Immersed in Fluids
4 Buoyancy Forces and Stability of Floating Bodies
5 Fluid Flow—Basic Concepts—Hydrodynamics
6 Bernoulli Equation and Applications
7 Flow in Closed Conduits (Pipes)
8 Dimensional Analysis
9 Similitude and Model Testing
10 Boundary Layer Theory and Flow Over Surfaces
11 flow Measurements
12 Flow in Open Channels
13 Dynamics of Fluid Flow
14 Hydraulic Turbines
15 Rotodynamic Pumps
16 Reciprocating Pumps

Jumlah Halaman : 615
Kualitas ebook : Good
Kode : Mekflu-004
Harga : Rp. 30.000 Read More/Selengkapnya......
Read More/Selengkapnya......

Kontrol korosi pada pipa


Chapter 1 Introduction to Corrosion
Chapter 2 Pipeline Coatings
Chapter 3 Cathodic Protection—How It Works
Chapter 4 Criteria for Cathodic Protection
Chapter 5 Survey Methods and Evaluation Technique
Chapter 6 Instrumentation
Chapter 7 Ground Bed Design
Chapter 8 Impressed Current Cathodic Protection
Chapter 9 Cathodic Protection with Galvanic Anodes
Chapter 10 Cathodic Protection with Other Power Sources
Chapter 11 Stray Current Corrosion
Chapter 12 Construction Practices
Chapter 13 Maintenance Procedures
Chapter 14 Microbiologically Influenced Corrosion
Chapter 15 Economics
Chapter 16 Fundamentals of Corrosion

Jumlah Halaman : 347
Kualitas ebook : Good
Kode : Korosi-006
Harga : Rp. 25.000

Read More/Selengkapnya......

Jumat, 26 Maret 2010

Corrosion Mechanisms in Theory and Practice


BASIC PHENOMENA
1. Introduction to Surface Reactions: Electrochemical Basis of Corrosion
2. Introduction to Surface Reactions: Adsorption from Gas Phase
3. Surface Effects on Hydrogen Entry into Metals
4. Anodic Dissolution
5. Thin Oxide Film Formation on Metals
6. Growth and Stability of Passive Films
7. Passivity of Austenitic Stainless Steels
8. Mechanisms of Pitting Corrosion
9. Sulfur-Assisted Corrosion Mechanisms and the Role of Alloyed Elements
10. Further Insights on the Pitting Corrosion of Stainless Steels
11. Crevice Corrosion of Metallic Materials
12. Stress-Corrosion Cracking Mechanisms
13. Corrosion Fatigue Mechanisms in Metallic Materials

APPLICATIONS
14. Corrosion Prevention by Adsorbed Organic Monolayers and Ultrathin Plasma Polymer Films
15. Atmospheric Corrosion
16. Microbially Influenced Corrosion
17. Corrossion in Nuclear Systems: Environmentally Assisted Cracking in Light Water Reactors
18. Corrosion of Microelectronic and Magnetic Data-Storage Devices
19. Organic Coatings
Jumlah Halaman : 726
Kualitas ebook : Good
Kode : Korosi-005
Harga : Rp. 25.000 Read More/Selengkapnya......

Standard test korosi



REVISED AND UPDATED, the new edition of this highly respected publication provides guidelines for recognizing types of corrosion, as well as the fundamentals of testing. It provides the most recent technologies for making calculations, interpretations, and correlations, and serves as a source book for procedures, equipment, and standards used in testing. AS AN ADDED BONUS you get a complimentary CD of 115 ASTM and 60 NACE standards referenced throughout the book. Eight sections cover: General Information provides the tools to define, interpret, and evaluate the technology. Greatly expanded, this section includes a UNS for metals and alloys and their common names; standards terminology; SI and matrix guide; general conversion tables; corrosion rate calculations and all necessary conversion factors; and much more. : Testing and Evaluation includes planning and design of tests, types of corrosion data, metallographic and surface analysis, statistical treatment of data, data computerization and computer applications: Types of Tests examines laboratory-accelerated tests, field tests, and service tests. This section describes test techniques and specific considerations such as specimen preparation, test duration, acceleration factors, and pertinent standards: Testing for Corrosion Types covers uniform, pitting, crevice, galvanic, intergranular, exfoliation, erosion, cavitation, fretting, dealloying, stress corrosion, corrosion fatigue and hydrogen damage: Testing in Environment addresses outdoor and indoor atmospheres, seawater, fresh water, soils, concrete, industrial waters, industrial chemical, petroleum, high-temperature gases, organic liquids, molten salts, liquid metals, corrosion inhibitors, in-vivo, and microbiological effects. : Materials Testing gives you an overview of important tests used in evaluating the corrosion behavior of metals and alloys, including zinc, lead, aluminum, steels, copper, nickel, stainless steels, cobalt-base alloys, titanium, zirconium and hafnium, tantalum and niobium alloys, metallic coatings on steel, nonmetallic coatings, metal matrix composites, electrodeposits, and powder metallurgy materials: Testing in Industries provides an overview of corrosion testing unique to each industry, including automotive, commercial aircraft, military aircraft and equipment, pipeline, highways, tunnels and bridges, marine-piers and docks, electric power, nuclear power, steam generation, flue gas desulphurization, electronics, telecommunications, metal processing, chemical processing, pulp and paper, petroleum production and refining, food and beverage, water handling systems, medical and dental, and pharmaceutical: Corrosion-Related Standards provides a comprehensive list of standards developed by various organizations including the American Petroleum Institute, American Waterworks Association, ASME International, ASTM International, International Electrotechnical Commission, ISO, NACE International, SAE International, and the Steel Structures Painting Council. : This new edition is certain to serve as a valuable resource for corrosion scientists and technologists in industry, government, and academia.

Jumlah Halaman : 886
Kualitas ebook : Good
Kode : Korosi-004
Harga : Rp. 40.000 Read More/Selengkapnya......

Metoda analisa dalam ilmu korosi rekayasa


Chapter 1 X-Ray Photoelectron Spectroscopy in Corrosion Research
Chapter 2 Auger Electron Spectroscopy
Chapter 3 Studies of Metal Corrosion and Oxidation Phenomenon Using Secondary Ion Mass Spectrometry
Chapter 4 MeV Ion Beam Analytical Methods
Chapter 5 Scanning Tunneling Microscopy and Atomic Force Microscopy.
Chapter 6 Synchrotron Methods for Corrosion Research
Chapter 7 Infrared Spectroscopy
Chapter 8 Glow Discharge Optical Emission Spectroscopy
Chapter 9 Recent Developments in the Application of Radiotracer Methods in Corrosion Studies
Chapter 10 Nanoindentation and Nanoscratching Techniques for Evaluation of Mechanical Properties of Surface Films
Chapter 11 Introduction to Electrochemical Instrumentation
Chapter 12 DC Electrochemical Methods
Chapter 13 Electrochemical Impedance Spectroscopy
Chapter 14 Electrochemical Noise Technique
Chapter 15 Scanning Electrode Techniques for Investigating Near-Surface
Solution Current Densities
Chapter 16 Application of Scanning Kelvin Probe in Corrosion Science
Chapter 17 The Microcell Technique
Chapter 18 Photoelectrochemical Techniques in Corrosion Studies
Chapter 19 Electrochemical Quartz Crystal Microbalance

Jumlah Halaman : 776
Kualitas ebook : Good
Kode : Korosi-003
Harga : Rp. 25.000
Read More/Selengkapnya......

Buku korosi


CHAPTER 1: The Effects and Economic Impact of Corrosion
CHAPTER 2: Basic Concepts Important to Corrosion
CHAPTER 3: Principles of Aqueous Corrosion
CHAPTER 4: Forms of Corrosion: Recognition and Prevention
CHAPTER 5: Types of Corrosive Environments
CHAPTER 6: Corrosion Characteristics of Structural Materials
CHAPTER 7: Corrosion Control by Proper Design
CHAPTER 8: Corrosion Control by Materials Selection
CHAPTER 9: Corrosion Control by Protective Coatings and Inhibitors
CHAPTER 10: Corrosion Control by Cathodic and Anodic Protection
CHAPTER 11: Corrosion Testing and Monitoring
CHAPTER 12: Techniques for Diagnosis of Corrosion Failures

Jumlah Halaman : 574
Kualitas ebook : Good
Kode : Korosi-002
Harga : Rp. 25.000
Read More/Selengkapnya......

Selasa, 23 Maret 2010

Simulation of Industrial Processes for Control Engineers


1 Introduction
2 Fundamental concepts of dynamic simulation
Thermodynamics and the conservation equations
Steady-state incompressible flow
Flow through ideal nozzles
Steady-state compressible flow
Control valve liquid flow
Liquid flow through the installed control valve
Gas flow through the installed control valve Control valve gas flow
Accumulation of liquids and gases in process vessels
Two-phase systems: boiling,condensing and distillation
Chemical reactions
Turbine nozzles
Steam and gas turbines
Steam and gas turbines:
simplified model

Jumlah Halaman : 390
Kualitas ebook : Good
Kode : Control-006
Harga : Rp. 30.000 Read More/Selengkapnya......

Home builder’s guide to continuous improvement


Chapter 1.Introduction
Chapter 2.Cycle Time Management
Chapter 3.Problems
Chapter 4.Problem Solving
Chapter 5.Dealing with Data
Chapter 6.Root Causes
Chapter 7.Corrective Actions
Chapter 8.Problem Follow-Up
Chapter 9.Relationships
Chapter 10.Sampling and Randomization
Chapter 11.Sample Size Determination
Chapter 12.Software
Chapter 13.Continuous Improvement Tools and Techniques .
Chapter 14.Quality Function Deployment
Chapter 15.Design of Experiments
Jumlah Halaman : 226
Kualitas ebook : Good
Kode : Build-008
Harga : Rp. 30.000 Read More/Selengkapnya......

Senin, 22 Maret 2010

Practical Balancing of Rotating Machinery


Buku sangat baik bagi praktisi yang berkaitan dengan rotating machine disebabkan permasalahan balancing adalah hal yang krusial untuk bidang ini. Buku ini terdiri dari 4 poko bahasan dengan sub-sub yang menarik dan praktis yaitu
Chapter 1 Introduction
Chapter 2 Eliminate unwanted motion!
Chapter 3 The balancing process
Chapter 4 Tooling and production
Jumlah Halaman : 227
Kualitas ebook : Good
Kode : PPI-001
Harga : Rp. 35.000 Read More/Selengkapnya......

Buku PLC


Chapter 1 - Ladder Diagram Fundamentals
Chapter 2 - The Programmable Logic Controller
Chapter 3 - Fundamental PLC Programming
Chapter 4 - Advanced Programming Techniques
Chapter 5 - Mnemonic Programming Code
Chapter 6 - Wiring Techniques
Chapter 7 - Analog I/O
Chapter 8 - Discrete Position Sensors
Chapter 9 - Encoders, Transducers, and Advanced Sensors
Chapter 10 - Closed Loop and PID Control
Chapter 11 - Motor Controls
Chapter 12 - System Integrity and Safety
Jumlah Halaman : 271
Kualitas ebook : Good
Kode : Control-005
Harga : Rp. 20.000 2 Read More/Selengkapnya......

Practical Process Control for Engineers and Technicians



Chapter 1 Introduction
Chapter 2 Process measurement and transducers
Chapter 3 Basic principles of control valves and actuators
Chapter 4 Fundamentals of control systems
Chapter 5 Stability and control modes of closed loops
6 Digital control principles
7 Real and ideal PID controllers
8 Tuning of PID controllers in both open and closed loop control systems
9 Controller output modes, operating equations and cascade control
10 Concepts and applications of feedforward control
11 Combined feedback and feedforward control
12 Long process deadtime in closed loop control and the Smith Predictor
13 Basic principles of fuzzy logic and neural networks
14 Self-tuning intelligent control and statistical process control
Jumlah Halaman : 304
Kualitas ebook : Good
Kode : Control-004
Harga : Rp. 30.000 Read More/Selengkapnya......

More guerrilla marketing research


1. Marketing research – why should you care?
2. Setting research goals and objectives
3. What Guerrillas can learn from large-company research
4. How to get started
5. How to set a research budget
6. Using research professionals
7. How much research should you do?
8. The research plan
9. Secondary research
10. Brainstorming and other ideation processes
11. Focus groups and qualitative research
12. Research into emotions
13. Surveys and quantitative research
14. Types of surveys
15. Writing questionnaires
16. Customer satisfaction research
17. Sampling
18. Organizing data
19. Statistical techniques
20. Telling the story: analyzing survey resu
21. Putting results into action
22. The future of marketing research
Jumlah Halaman : 369
Kualitas ebook : Good
Kode : Marketing-003
Harga : Rp. 25.000 Read More/Selengkapnya......

Minggu, 21 Maret 2010

REPOSITIONING MARKETING


PART 1 COMPETITION
1 The Foundation
2 The Rise of the Competition
3 Repositioning the Competition

PART 2 CHANGE
4 Change Happens; Evolution Is Reality
5 The Bigger They Are, the Harder They Are to Change
6 When Not to Evolve

PART 3 CRISIS
7 A Crisis Can Change the Game
8 Value Is the Name of the Game

PART 4 THE ART OF REPOSITIONING
9 Repositioning Takes Time
10 Repositioning Is Not for the Meek
11 Repositioning BeginsEnds with the CEO
12 Repositioning Is Obvious
Jumlah Halaman : 225
Kualitas ebook : Good
Kode : Marketing-002
Harga : Rp. 25.000
Read More/Selengkapnya......

MARKETING METRICS


Chapter 1 INTRODUCTION
Chapter 2 SHARE OF HEARTS, MINDS, AND MARKETS
Chapter 3 MARGINS AND PROFITS
Chapter 4 PRODUCT AND PORTFOLIO MANAGEMENT
Chapter 5 CUSTOMER PROFITABILITY
Chapter 6 SALES FORCE AND CHANNEL MANAGEMENT
Chapter 7 PRICING STRATEGY
Chapter 8 PROMOTION
Chapter 9 ADVERTISING MEDIA AND WEB METRICS
Chapter 10 MARKETING AND FINANCE
Chapter 11 THE MARKETING METRICS X-RAY
Chapter 12 SYSTEM OF METRICS
Jumlah Halaman : 433
Kualitas ebook : Good
Kode : Marketing-001
Harga : Rp. 25.000 Read More/Selengkapnya......

Sabtu, 20 Maret 2010

Construction Supply Chain Management

Chapter 1 Introducition
Chapter 2 The Concept and Development of Supply Chain Management in the UK Construction Industry
Chapter 3 Culture in Supply Chains
Chapter 4 Learning to Co-operate and Co-operating to Learn:
Knowledge, Learning and Innovai on in Construction Supply Chains
Chapter 5 Marketing and Pricing Strategy
Chapter 6 Risk Management and the Supply Chain
Chapter 7 Slough Estates in the 1990s – Client Driven SCM
Chapter 8 From Heathrow Express to Heathrow Terminal 5: BAA’s Development of Supply Chain Management
Chapter 9 Supply Chain Management: A Main Contractor’s Perspeci ve
Chapter 10 Franchising the Supply Chain
Chapter 11 Conclusion

Jumlah Halaman : 246
Kualitas ebook : Good
Kode : Build-007
Harga : Rp. 30.000 (Sudah termasuk bea pengiriman) Read More/Selengkapnya......

Advances in construction materials 2007


Part I Aspects of Structural Engineering 

Part II Fiber Composites 

Part III Repair Materials and Strengthening Methods 

Part IV High Temperature and Fire Resistance 

Part V Corrosion and Durability 

Part VI Properties, Modeling and Testing of Fresh Concrete 

Part VII Non-destructive Testing Methods and Applications 

Part VIII Environment and Sustainability 

Part IX Mechanical and Thermal Properties of Materials 

Jumlah Halaman : 764
Kualitas ebook : Good
Kode : Build-006
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman)


Read More/Selengkapnya......

BUILDING SERVICES HANDBOOK


Part One Introduction
Part Two Cold Water and Supply Systems
Part Three Hot Water Supply Systems
Part Four Heating Systems
Part Five Fuel Characteristics and Storage
Part Six Ventilation Systems
Part Seven Air Conditioning
Part Eight Drainage Systems, Sewage Treatment and Refuse Disposal
Part Nine Sanitary Fitments and Appliances: Discharge and Waste Systems
Part Ten Gas Installation, Components and Controls
Part Eleven Electrical Supply and Installations
Part Twelve Mechanical Conveyors – Lifts, Escalators and Travelators
Part Thirteen Fire Prevention and Control Services
Part Fourteen Security Installations
Part Fifteen Accommodation for Building Services
Part Sixteen Alternative and Renewable Energy
Jumlah Halaman : 649
Kualitas ebook : Good
Kode : Build-005
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman) Read More/Selengkapnya......

Understanding Quality Assurance in Construction

PART ONE ESTABLISHING A QUALITY SYSTEM
1 Quality and quality assurance
2 Quality system and system requirements
4 Developing a quality system
5 Implementing a quality system
6 Third party certification
7 Facts and fallacies
PART TWO DOCUMENTING A QUALITY SYSTEM
8 Writing quality system documents
9 Sample quality system documents
Jumlah Halaman : 262
Kualitas ebook : Good
Kode : Build-004
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman) Read More/Selengkapnya......

Prosedur penggunaan web dan order

Tata Cara penggunaan web ini anda bisa mencari buku yang anda inginkan berdasarkan kategori yang telah kami buat dengan mengklik kategori buku yang dicari dibawah direktori label yang bisa anda lihat disamping kiri dari web ini seperti gambar berikut:



Jika anda membutuhkan suatu buku anda bisa request dengan mengirimkan judul buku ke
0881 3149 486 Read More/Selengkapnya......

Programmable Logic Controllers


Chapter 1. Programmable logic controllers
Chapter 2. Input-output devices
Chapter 3. Number systems
Chapter 4. I/O processing
Chapter 5. Ladder and functional block programming
Chapter 6. IL, SFC and ST programming methods
Chapter 7. Internal relays
Chapter 8. Jump and call
Chapter 9. Timers
Chapter 10.Counters
Chapter 11.Shift registers
Chapter 12.Data handling
Chapter 13.Designing systems
Chapter 14.Programs
Jumlah Halaman : 303
Kualitas ebook : Good
Kode : Control-003
Harga : Rp. 20.000 Read More/Selengkapnya......

Servo Motors and Industrial Control Theory


1 Feedback Control Theory
2 Feedback Control Theory Continued 
3 State Variable Feedback Control Theory
4 Electrical DC Servo Motors
5 Stepping Servo Motors 
6 AC Servo Motors  
7 Electrohydraulic Servo Motors 
8 Actuators Based on Electro-Rheological Fluid  
9 The Choice and Comparison of Servo Motors
Jumlah Halaman : 236
Kualitas ebook : Good
Kode : Control-002
Harga : Rp. 20.000 Read More/Selengkapnya......

Rabu, 17 Maret 2010

industrial control wiring guide


1 Safety 
2 Drawings
3 Wire types and preparation
4 Soldering and termination
5 Cable forming 
6 Connections and routing.
7 Hardware
8 Components (active) 
9 Components (passive) 
10 Switches and lamps
11 Earthing and screening

12 PLC wiring

Jumlah Halaman : 134
Kualitas ebook : Good
Kode : Control-001

Harga : Rp. 20.000 

Read More/Selengkapnya......

Batch Processes


PART I Batch Processing General Overview
Chapter 1 Introduction
Chapter 2 Batch Processing Industries

PART II Batch Processing Design Issues
Chapter 3 Conceptual Design and Synthesis of Batch Processes
Chapter 4 Batch Reactors in the Bioindustries
Chapter 5 Batch Distillation
Chapter 6 Batch Crystallization
Chapter 7 Crystallization and Associated Solid–Liquid Separations
Chapter 8 Pollution Prevention for Batch Pharmaceutical and Specialty
Chemical Processes

PART III Batch Processing Management
Chapter 9 Batch Process Modeling and Optimization
Chapter 10 Batch Process Management: Planning and Scheduling
Chapter 11 Monitoring and Control of Batch Processes .
Chapter 12 Supply-Chain Management

PART IV Future of Batch Processing
Chapter 13 Concluding Remarks and Future Prospects
Jumlah Halaman : 525
Kualitas ebook : Good
Kode : Proses-002
Harga : Rp. 30.000 Read More/Selengkapnya......

Selasa, 16 Maret 2010

Successful TroubleShooting for Process Engineers


1 What is Trouble Shooting?
2 The Mental Problem-Solving Process used in Trouble Shooting
3 Rules of Thumb for Trouble Shooting
4 Trouble Shooting in Action: Examples 133
5 Polishing Your Skills: Problem-Solving Process
6 Polishing Your Skills: Gathering Data and the Critical-Thinking Process
7 Polishing Your Skills: Interpersonal Skills and Factors Affecting Personal Performance
8 Prescription for Improvement: Put it all Together
9 What next ?
Jumlah Halaman : 637
Kualitas ebook : Good
Kode : Proses-001
Harga : Rp. 30.000 Read More/Selengkapnya......

Buku pegangan rekayasa manufaktur


Buku ini sangat baik bagi mahasiswa dan Dosen teknik mesin, indutri serta praktisi manufaktur. Buku ini terdiri dari 6 bagian utama dan 61 pokok bahasan antara lain

Part 1 Product Development and Design
Part 2 Manufacturing Automation and Technologies
Part 3 Heat Treating, Hot Working, and Metalforming
Part 4 Metalworking, Moldmaking, and Machine Design
Part 5 Robotics, Machine Vision, and Surface Preparation
Part 6 Manufacturing Processes Design
Jumlah Halaman : 1193
Kualitas ebook : Good
Kode : Manufaktur-002
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman) Read More/Selengkapnya......

Pengantar Proses Dasar Manufaktur dan teknologi workshop


1. Introduction
2. Plant and Shop Layout
3. Industrial Safety
4. Ferrous Materials
5. Non-Ferrous Materials
6. Melting Furnaces
7. Porperties and Testing of Metals
8. Heat Treatment
9. Carpentry
10. Pattern and Core Making
11. Foundry Tools and Equipments
12. Mold and Core Making
13. Casting
14. Forging
15. Hot Working of Metals
16. Cold Working
17. Welding
18. Sheet Metal Work
19. Fitting
20. Metal Cutting
21. Lathe Machine
22. Drilling Machine
23. Shaper, Planer and Slotter
24. Milling
25. Powder Metallurgy
26. Inspection and Quality Control
Jumlah Halaman : 506
Kualitas ebook : Good
Kode : Manufaktur-001
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman) Read More/Selengkapnya......

CORROSION AND CORROSION CONTROL


1 DEFINITION AND IMPORTANCE OF CORROSION
2 ELECTROCHEMICAL MECHANISMS
3 THERMODYNAMICS: CORROSION TENDENCY AND ELECTRODE POTENTIALS 
4 THERMODYNAMICS: POURBAIX DIAGRAMS
5 KINETICS: POLARIZATION AND CORROSION RATES
6 PASSIVITY 
7 IRON AND STEEL 
8 EFFECT OF STRESS 
9 ATMOSPHERIC CORROSION 
10 CORROSION IN SOILS 
11 OXIDATION 
12 STRAY-CURRENT CORROSION
13 CATHODIC PROTECTION
14 METALLIC COATINGS
15 INORGANIC COATINGS
16 ORGANIC COATINGS
17 INHIBITORS AND PASSIVATORS
18 TREATMENT OF WATER AND STEAM SYSTEMS
19 ALLOYING FOR CORROSION RESISTANCE STAINLESS STEELS 
20 COPPER AND COPPER ALLOYS
21 ALUMINUM AND ALUMINUM ALLOYS
22 MAGNESIUM AND MAGNESIUM ALLOYS
23 NICKEL AND NICKEL ALLOYS
24 COBALT AND COBALT ALLOYS
25 TITANIUM
26 ZIRCONIUM
27 TANTALUM
28 LEAD

Jumlah Halaman : 513
Kualitas ebook : Good
Kode : Korosi-001
Harga : Rp. 25.000

Read More/Selengkapnya......

Structural Dynamics in Industry


Chapter 1. General Introduction to Linear Analysis
Chapter 2. The Single-Degree-of-Freedom System
Chapter 3. Multiple-Degree-of-Freedom Systems 
Chapter 4. The Modal Approach
Chapter 5. Modal Effective Parameters
Chapter 6. Continuous Systems
Chapter 7. Complex Modes 
Chapter 8. Modal Synthesis 
Chapter 9. Frequency Response Synthesis 
Chapter 10. Introduction to Non-linear Analysis
Chapter 11. Testing Techniques
Chapter 12. Model Updating and Optimization

Jumlah Halaman : 448
Kualitas ebook : Good
Kode : DINSTRUK-003
Harga : Rp. 20.000


Read More/Selengkapnya......

Pengantar Dinamika Struktur


Chapter 1 The Lagrange Equations of Motion 
Chapter 2 Mechanical Vibrations: Practice Using the Lagrange Equations
Chapter 3 Review of the Basics of the Finite Element Method for Simple Elements 
Chapter 4 FEM Equations of Motion for Elastic Systems
Chapter 5 Damped Structural Systems
Chapter 6 Natural Frequencies and Mode Shapes
Chapter 7 The Modal Transformation
Chapter 8 Continuous Dynamic Models
Chapter 9 Numerical Integration of the Equations of Motion

Jumlah Halaman : 567
Kualitas ebook : Good
Kode : DINSTRUK-002
Harga : Rp. 20.000 

Read More/Selengkapnya......

Senin, 15 Maret 2010

Dinamika Struktur




















Jumlah Halaman : 794
Kualitas ebook : Good
Kode : DINSTRUK-001
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman) Read More/Selengkapnya......

Minggu, 14 Maret 2010

assessing building Performance


Part One Introduction and Overview
1. The evolution of building performance evaluation: an introduction
2. A conceptual framework for building performance evaluation

Part Two Performance Assessments in the Six-Phase
Building Delivery and Life Cycle
3. Phase 1: Strategic planning – effectiveness review
4. Phase 2: Programming/briefing – programme review
5. Phase 3: Design – design review
6. Phase 4: Construction – commissioning
7. Phase 5: Occupancy – post-occupancy evaluation
8. Phase 6: Adaptive reuse/recycling – market needs assessment

Part Three Case Studies
9. Benchmarking the ‘sustainability’ of a building project
10. Introducing the ASTM facilities evaluation methodology
11. Assessing the performance of offices of the future
12. Assessing Brazilian workplace performance
13. User satisfaction surveys in Israel
14. Building performance evaluation in Japan
15. Evaluation of innovative workplace design in the Netherlands
16. Evaluating universal design performance
17. The facility performance evaluation working group
18. The human element in building performance evaluation
19. Looking to the future
Jumlah Halaman : 267
Kualitas ebook : Good
Kode : Build-003 
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman) Read More/Selengkapnya......

External Works and Drainage—A Practical Guide


1 Design preliminaries
2 Essential legislation
3 Consultations and agreements
4 Environmental issues
5 Drainage design
6 Surface water drainage
7 Highway drainage
8 Foul drainage
9 Sewer rehabilitation and repair
10 Pipe laying and materials
11 Roads
12 Bitumen technology and testing
13 Aspects of pavement construction
14 Road design
15 External works and other surfaces

Jumlah Halaman : 240
Kualitas ebook : Good
Kode : Build-002
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman) Read More/Selengkapnya......

New developments in advanced welding


chapter 1 Gas metal arc welding
chapter 2 Tubular cored wire welding
chapter 3 Gas tungsten arc welding
chapter 4 Laser beam welding
chapter 5 Nd:YAG laser welding
chapter 6 New developments in laser welding
chapter 7 Electron beam welding
chapter 8 Developments in explosion welding technology
chapter 9 Ultrasonic metal welding
chapter 10 Occupational health and safety
Jumlah Halaman : 309
Kualitas ebook : Rated ( Hasil scan )
Kode : Weld-008
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman) Read More/Selengkapnya......

PRINCIPLES OF WELDING


I THE PROCESS AND PROCESSES OF WELDING
1 INTRODUCTION TO THE PROCESS OF WELDING
2 CLASSIFYING WELDING PROCESSES
3 FUSION WELDING PROCESSES 

4 NONFUSION WELDING PROCESSES

II THE PHYSICS OF WELDING
5 ENERGY FOR WELDING
6 THE FLOW OF HEAT IN WELDS
7 THERMALLY INDUCED DISTORTION AND RESIDUAL STRESSES DURING WELDING
8 THE PHYSICS OF WELDING ENERGY OR POWER SOURCES
9 MOLTEN METAL TRANSFER IN CONSUMABLE ELECTRODE ARC WELDING
10 WELD POOL CONVECTION, OSCILLATION, AND EVAPORATION

III THE CHEMISTRY OF WELDING
11 MOLTEN METAL AND WELD POOL REACTIONS
12 WELD CHEMICAL HETEROGENEITY 

IV THE METALLURGY OF WELDING
13 WELD FUSION ZONE SOLIDIFICATION
14 EUTECTIC, PERITECTIC, AND POSTSOLI DI FICATION FUSION ZONE TRANSFORMATIONS
15 THE PARTIALLY MELTED ZONE
16 THE WELD HEAT-AFFECTED ZONE
17 WELDABILITY AND WELD TESTING 

Jumlah Halaman : 689
Kualitas ebook : Rated ( Hasil scan )
Kode : Weld-007
Harga : Rp. 30.000 (Sudah termasuk bea pengiriman)

Read More/Selengkapnya......

Resistance Welding


Chapter 1 Welding metallurgy  
Chapter 2 Electrothermal Processes of Welding
Chapter 3 Weld Discontinuities
Chapter 4 Mechanical Testing
Chapter 5 Resistance Welding Process Monitoring and Control
Chapter 6 Weld Quality and Inspection
Chapter 7 Expulsion in Resistance Spot Welding
Chapter 8 Influence of Mechanical Characteristics of Welding Machines
Chapter 9 Numerical Simulation in Resistance Spot Welding

Chapter 10   tatistical Design, Analysis, and Inference in Resistance Welding Research

Jumlah Halaman : 446
Kualitas ebook : Good
Kode : Weld-006 
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman)

Read More/Selengkapnya......

WELDING METALLURGY

I INTRODUCTION
Chapter 1 Fusion Welding Processes
Chapter 2 Heat Flow in Welding
Chapter 3 Chemical Reactions in Welding
Chapter 4 Fluid Flow and Metal Evaporation in Welding
Chapter 5 Residual Stresses, Distortion, and Fatigue

II THE FUSION ZONE
Chapter 6 Basic Solidification Concepts
Chapter 7  Weld Metal Solidification I: Grain Structure
Chapter 8 Weld Metal Solidification II: Microstructure within
Chapter 9 Post-Solidification Phase Transformations
Chapter 10 Weld Metal Chemical Inhomogeneities
Chapter 11 Weld Metal Solidification Cracking

III THE PARTIALLY MELTED ZONE
Chapter 12 Formation of the Partially Melted Zone
Chapter 13 Difficulties Associated with the Partially Melted Zone

IV THE HEAT-AFFECTED ZONE
Chapter 14 Work-Hardened Materials
Chapter 15 Precipitation-Hardening Materials I: Aluminum Alloys
Chapter 16 Precipitation-Hardening Materials II: Nickel-Base Alloys
Chapter 17 Transformation-Hardening Materials: Carbon and Alloy Steels
Chapter 18 Corrosion-Resistant Materials: Stainless Steels
Jumlah Halaman : 466
Kualitas ebook : Good
Kode : Weld-005
Harga : Rp. 35.000 (Sudah termasuk bea pengiriman) Read More/Selengkapnya......

Jumat, 12 Maret 2010

Handbook of Maintenance Management and Engineering

1 Maintenance Organization
2 Maintenance Productivity and Performance Measurement
3 Failure Statistics
4 Failure Mode and Effect Analysis
5 Maintenance Control
6 Guidelines for Budgeting and Costing Planned Maintenance Services
7 Simulation Based Approaches for Maintenance Strategies Optimization
8 Maintenance Forecasting and Capacity Planning
9 Integrated Spare Parts Management
10 Turnaround Maintenance
11 Maintenance Planning and Scheduling
12 Models for Production and Maintenance Planning in Stochastic Manufacturing Systems
13 Inspection Strategies for Randomly Failing Systems
14 System Health Monitoring and Prognostics – A Review of Current Paradigms and Practices
15 Applied Maintenance Models
16 Reliability Centered Maintenance
17 Total Productive Maintenance .........
18 Warranty and Maintenance
19 Delay Time Modeling for Optimized Inspection Intervals of Production Plant
20 Integrated E-maintenance and Intelligent Maintenance Systems
21 Maintainability and System Effectiveness
22 Safety and Maintenance
23 Maintenance Quality and Environmental Performance Improvement: An Integrated Approach
24 Industrial Asset Maintenance and Sustainability Performance: Economical, Environmental, and Societal Implications
25 Human Reliability and Error in Maintenance
26 Human Error in Maintenance – A Design Perspective
Jumlah Halaman : 746
Kualitas ebook : Good
Kode : PM 012
Harga : Rp. 30.000 Read More/Selengkapnya......

ENGINEERING TRIBOLOGY



1 INTRODUCTION
2 PHYSICAL PROPERTIES OF LUBRICANTS
3 LUBRICANTS AND THEIR COMPOSITION
4 HYDRODYNAMIC LUBRICATION
5 COMPUTATIONAL HYDRODYNAMICS
6 HYDROSTATIC LUBRICATION
7 ELASTOHYDRODYNAMIC LUBRICATION
8 BOUNDARY AND EXTREME PRESSURE LUBRICATION
9 SOLID LUBRICATION AND SURFACE TREATMENTS
10 FUNDAMENTALS OF CONTACT BETWEEN SOLIDS
11 ABRASIVE, EROSIVE AND CAVITATION WEAR
12 ADHESION AND ADHESIVE WEAR
13 CORROSIVE AND OXIDATIVE WEAR
14 FATIGUE WEAR
15 FRETTING AND MINOR WEAR MECHANISMS
16 WEAR OF NON-METALLIC MATERIALS
Jumlah Halaman : 765
Kualitas ebook : Good
Kode : PM 011
Harga : Rp. 25.000 Read More/Selengkapnya......

Minggu, 07 Maret 2010

Welding Metallurgy and Weldability of Stainless Steels

Welding Metallurgy and Weldability of Stainless Steels, the first book in over twenty years to address welding metallurgy and weldability issues associated with stainless steel, offers the most up-to-date and comprehensive treatment of these topics currently available. The authors emphasize fundamental metallurgical principles governing microstructure evolution and property development of stainless steels, including martensistic, ferric, austenitic, duplex, and precipitation hardening grades. They present a logical and well-organized look at the history, evolution, and primary uses of each stainless steel, including detailed descriptions of the associated weldability issues. Read More/Selengkapnya......

Recent Advances in Maintenance and Infrastructure Management


1 Introduction
2 Technologies for Dependability and Maintenance
3 Modeling and Metric
4 Maintenance Management and Organization
5 Facility Management, Outsourcing and Contracting Overview
Jumlah Halaman : 301
Kualitas ebook : Good
Kode : PM 010
Harga : Rp. 25.000 Read More/Selengkapnya......

Selasa, 02 Maret 2010

Sistem pembakaran dinamik


PART 1 EXOTHERMICITY

1 Thermodynamic Aspects 

2 Evolutionary Aspects 

3 Heat Transfer Aspect

4 Chemical Kinetic Aspects

PART 2 FIELD

5 Aerodynamic Aspects.

6 Random Vortex Method

7 Gasdynamic Aspects 

8 Fronts and Interfaces 

PART 3 EXPLOSION
9 Blast Waves

10 Self-Similar Blast Wave

11 Phase Space Method

12 Detonations

Jumlah Halaman : 236
Kualitas ebook : Good
Kode : Combustion-006
Harga : Rp. 25.000 (include ongkos kirim) By email

Harga : Rp. 30.000 (include ongkos kirim) By Pos


Read More/Selengkapnya......