Selasa, 28 Desember 2010

Construction Materials


Part 1 Fundamentals
Part 2 metals and alloys
Part 3 ConCrete
Part 4 Bituminous materials
Part 5 masonry
Part 6 Polymers
Part 7 FiBre ComPosites
Part 8 timBer
Part 9 Glass
Part 10 seleCtion and sustainaBle use oF ConstruCtion materials
Jumlah Halaman : 584
Kualitas ebook : good
Kode : Kontruksi-014
Harga : Rp. 35.000 Read More/Selengkapnya......

Equipment management


Chapter 1 Understanding Equipment Management
Chapter 2 Applying the Principles of Equipment Management
Chapter 3 Developing the Equipment Management Program
Chapter 4 Leadership in Equipment Management
Chapter 5 Organization
Chapter 6 Work Load Versus Work Force
Chapter 7 Improving Work Force Productivity
Chapter 8 Understanding Preventive Maintenance
Chapter 9 Effective Planning and Scheduling
Chapter 10 Reliability Centered Maintenance
Chapter 11 Total Productive Maintenance
Chapter 12 Implementing Information Systems
Chapter 13 Essential Information
Chapter 14 Nonmaintenance Project Work
Chapter 15 Benchmarking
Chapter 16 Material Control
Chapter 17 Cost Control
Chapter 18 Assessing Maintenance Performance
Jumlah Halaman : 326
Kualitas ebook : Good
Kode : MAJ-014
Harga : Rp. 30.000 Read More/Selengkapnya......

Cost Reduction Analysis


PART I PRIMARY AREAS OF COST REDUCTION
CHAPTER 1 The Cost Reduction Process
CHAPTER 2 Selling and Marketing Cost Reduction
CHAPTER 3 Product Analysis
CHAPTER 4 Production Cost Reduction
CHAPTER 5 Payroll Cost Reduction
CHAPTER 6 Bene? ts Cost Reduction

PART II PROCUREMENT COST REDUCTION
CHAPTER 7 Procurement Cost Reduction
CHAPTER 8 Spend Analysis
CHAPTER 9 Maintenance, Repair, and Operations Analysis 1

PART III ASSET REDUCTION
CHAPTER 10 Inventory Analysis
CHAPTER 11 Fixed Asset Analysis
PART IV SPECIAL TOPICS
CHAPTER 12 Throughput Analysis
CHAPTER 13 Cost Reduction in Mergers and Acquisitions
Jumlah Halaman : 336
Kualitas ebook : Good
Kode : MAJ-013
Harga : Rp. 30.000 Read More/Selengkapnya......

CPM in Construction Management


Part 1. Introduction to CPM Planning and Scheduling
Chapter 1. Introduction to CPM Planning and Scheduling
Chapter 2. Project Control Systems Evolve in Academia
Chapter 3. Project Control Systems Evolve in the Marketplace

Part 2. The Theory of CPM Planning and Scheduling
Chapter 4. Your New Tool—Read Before Using
Chapter 5. Network Construction
Chapter 6. The Durations of the Logic Network
Chapter 7. What Comes Out
Chapter 8. Cranking the Engine
Chapter 9. Adding Complexity
Chapter 10. PDM and Precedence Networks
Chapter 11. Respecting the Power of PDM
Chapter 12. Enhancements and Extensions by Software Vendor

Part 3. The Tools of CPM Planning and Scheduling
Chapter 13. Measure Twice—Cut Once
Chapter 14. Choosing Codes
Chapter 15. Acquiring Information to Initial Schedule
Chapter 16. Acquiring the Durations
Chapter 17. Specifying the Relationships Between Activities
Chapter 18. Example Project:The John Doe Project

Part 4. The Practice of CPM Planning
Chapter 19. Equipment and Workforce Planning
Chapter 20. Procurement
Chapter 21. Preconstruction
Chapter 22. Evolution of the Project Schedule
Chapter 23. CPM and Cost Control

Part 5. The Practice of CPM Scheduling
Chapter 24. Let’s Look Under the Hood at the Engine
Chapter 25. Converting the Team Plan to the Calculated Schedule
Chapter 26. Engineer’s Review of the Submitted Initial CPM
Chapter 27. Updating the Schedule
Chapter 28. Engineer’s Review of the Submitted Update
Chapter 29. Revising the Logic Network
Chapter 30. Engineer’s Review of the Submitted Revision
Chapter 31. Case Histories
Chapter 32. Additional Exercises for Students of Project Controls

Part 6. Advanced Topics
Chapter 33. Specifying CPM
Chapter 34. CPM in Claims and Litigation
Chapter 35. Delay Analysis
Chapter 36. Disruption Analyses
Chapter 37. Advanced Topics: Resource Leveling and Smoothing
Chapter 38. Advanced Topics: PERT, SPERT, and GERT
Chapter 39. Conclusion
Jumlah Halaman : 674
Kualitas ebook : good
Kode : Kontruksi-013
Harga : Rp. 35.000 Read More/Selengkapnya......

Senin, 27 Desember 2010

What Google Never Told You About Making Money with AdSense

PART 1. GETTING STARTED WITH GOOGLE ADSENSE
2. ADSENSE MAKING THE MONEY!
3. HOW TO "TWEAK" YOUR ADS TO MAKE THEM click
4. USING COLORS TO INCREASE YOUR CLICKS
5. HOW TO MAXIMIZE VISIBILITY AND RESPONSE
6. CONTROLLING YOUR ADS
7. QUICKSTART ADSENSE: A STEP-BY-STEP GUIDE

PART 2: BEYOND BASIC ADS
8. CATCH FICKLE VISITORS WITH THE GOOGLE SEARCH BOX
9. ADSENSE AND FIREFOX REFERRAL PROGRAMS
10. USING MULTIPLE AD BLOCKS
11. BUILDING CONTENT

PART 3: FOLLOWING THE FIGURES
12.RESPONSE TRACKING: YOUR HIDDEN POT OF ADSENSE GOLD!
13. SMART PRICING AND WHAT IT MEANS FOR YOUR INCOME
Jumlah Halaman : 199
Kualitas ebook : good
Kode : Internet-002
Harga : Rp. 20.000 Read More/Selengkapnya......

Amazon TOP SELLER SECRETS

CHAPTER 1 AMAZON, AND YOU’RE DONE
CHAPTER 2 WHICH WAY SHOULD I GO?
CHAPTER 3 YOU HAVE TO BUY IT BEFORE YOU CAN SELL IT
CHAPTER 4 CREATING GREAT PRODUCT DETAIL PAGES
CHAPTER 5 AUTOMATING YOUR AMAZON BUSINESS
CHAPTER 6 CUSTOMER SERVICE WITHOUT THE SMILE
CHAPTER 7 MARKETING YOUR AMAZON BUSINESS
CHAPTER 8 SHIPPING: THE WORKHORSE OF YOUR OPERATION
CHAPTER 9 LIFE BEYOND AMAZON: SELLING THROUGH OTHER VENUES
Jumlah Halaman : 321
Kualitas ebook : good
Kode : Internet-001
Harga : Rp. 20.000 Read More/Selengkapnya......

Minggu, 26 Desember 2010

Construction Superintendent’s Operations Manual

Chapter 1. A Construction Industry Snapshot
Chapter 2. Construction Contracts and How They Are Administered
Chapter 3. General Conditions of the Construction Contract
Chapter 4. Organizing the Project—Before and During Construction
Chapter 5. Organizing in the Field
Chapter 6. Working with Subcontractors
Chapter 7. Dealing With Dif?cult Issues at the Construction Site
Chapter 8. Rehabilitation and Renovation of Older Buildings
Chapter 9. Safety at the Job Site
Chapter 10. Quality Control and Quality Assurance
Chapter 11. The Legal World We Live In: Claims and Disputes
Chapter 12. Effective Letter Writing for Project Superintendents
Jumlah Halaman : 475
Kualitas ebook : good
Kode : Kontruksi-012
Harga : Rp. 35.000 Read More/Selengkapnya......

The Design of Modern Steel Bridges


1 Types and History of Steel Bridges
2 Types and Properties of Steel
3 Loads on Bridges
4 Aims of Design
5 Rolled Beam and Plate Girder Design
6 Stiffened Compression Flanges of Box and Plate Girders
7 Cable-stayed Bridges
Jumlah Halaman : 226
Kualitas ebook : good
Kode : Bridge-002
Harga : Rp. 35.000 Read More/Selengkapnya......

Selasa, 21 Desember 2010

Fluid Mechanics for Engineers

1 Introduction
2 Vector and Tensor Analysis, Applications to Fluid Mechanics
3 Kinematics of Fluid Motion
4 Differential Balances in Fluid Mechanics
5 Integral Balances in Fluid Mechanics
6 Inviscid Flows
7 Viscous Laminar Flow
8 Laminar-Turbulent Transition
9 Turbulent Flow, Modeling
10 Free Turbulent Flow
11 Boundary Layer Theory
12 Compressible Flow
Jumlah Halaman : 517
Kualitas ebook : Good
Kode : Mekflu-002
Harga : Rp. 30.000 Read More/Selengkapnya......

Basic Fluid Mechanics and hydraulic Machines




CHAPTER - 1 Dimensions and Systems of Units
CHAPTER - 2 Fluid Flow
CHAPTER - 3 Thermal and Hydropower Stations
CHAPTER- 4 Fluid Machinery
CHAPTER- 5 Pelton Turbine
CHAPTER - 6 Francis Turbine
CHAPTER - 7 Propeller and Kaplan Turbines
CHAPTER - 8 Turbo Pumps
CHAPTER - 9 Positive Displacement Pumps
Jumlah Halaman : 245
Kualitas ebook : Good
Kode : Mekflu-001
Harga : Rp. 30.000 Read More/Selengkapnya......

ENGINEERING HEAT TRANSFER

Chapter 1 Fundamental Concepts
Chapter 2 Steady-State Conduction in One Dimension
Chapter 3 Steady-State Conduction in Multiple Dimensions
Chapter 4 Unsteady-State Heat Conduction
Chapter 5 Introduction to Convection
Chapter 6 Convection Heat Transfer in a Closed Conduit
Chapter 7 Convection Heat Transfer in Flows Past Immersed Bodies
Chapter 8 Natural-Convection Systems
Chapter 9 Heat Exchangers
Chapter 10 Condensation and Vaporization Heat Transfer
Chapter 11 Introduction to Radiation Heat Transfer
Chapter 12 Radiation Heat Transfer between Surfaces
Jumlah Halaman : 690
Kualitas ebook : Good
Kode : Perpan-009
Harga : Rp. 30.000 Read More/Selengkapnya......

EVERYDAY HEAT TRANSFER PROBLEMS

Chapter 1 Heat Loss from Walls in a Typical House
Chapter 2 Conduction Heat Transfer in a Printed Circuit Board
Chapter 3 Heat Transfer from Combustion Chamber Walls
Chapter 4 Heat Transfer from a Human Body During Solar Tanning
Chapter 5 Ef?ciency of Rectangular Fins
Chapter 6 Heat Transfer from a Hot Drawn Bar
Chapter 7 Maximum Current in an Open-Air Electrical Wire
Chapter 8 Evaporation of Liquid Nitrogen in a Cryogenic Bottle
Chapter 9 Thermal Stress in a Pipe
Chapter 10 Heat Transfer in a Pipe with Uniform Heat Generation in its Walls
Chapter 11 Heat Transfer in an Active Infrared Sensor
Chapter 12 Cooling of a Chip
Chapter 13 Cooling of a Chip Utilizing a Heat Sink with Rectangular Fins
Chapter 14 Heat Transfer Analysis for Cooking in a Pot
Chapter 15 Insulating a Water Pipe from Freezing
Chapter 16 Quenching of Steel Balls in Air Flow
Chapter 17 Quenching of Steel Balls in Oil
Chapter 18 Cooking Time for Turkey in an Oven
Chapter 19 Heat Generated in Pipe Flows due to Friction
Chapter 20 Sizing an Active Solar Collector for a Pool
Chapter 21 Heat Transfer in a Heat Exchanger
Chapter 22 Ice Formation on a Lake
Chapter 23 Solidi? cation in a Casting Mold
Chapter 24 Average Temperature Rise in Sliding Surfaces in Contact
Jumlah Halaman : 240
Kualitas ebook : Good
Kode : Perpan-008
Harga : Rp. 30.000 Read More/Selengkapnya......

Senin, 13 Desember 2010

Engineering Thermodynamics of Thermal Radiation

1 Introduction
2 Definitions and Laws of Substance
3 Definitions and Laws of Radiation
4 The Laws of Thermodynamic Analysis
5 Thermodynamic Properties of Photon Gas
6 Exergy of Emission
7 Radiation Flux
8 Radiation Spectra of a Surface
9 Discussion of Radiation Exergy Formulae Proposed by Researchers
10 Thermodynamic Analysis of Heat from the Sun
11 Thermodynamic Analysis of a Solar Chimney Power Plant
12 Thermodynamic Analysis of Photosynthesis
13 Thermodynamic Analysis of the Photovoltaic
Jumlah Halaman : 416
Kualitas ebook : Good
Kode : Termo-006
Harga : Rp. 35.000 Read More/Selengkapnya......

Maintenance Resources Management Adapting MRP

1 Maintenance, its Organisation and Management
2 Management of Maintenance Resources
3 Maintenance Management—Adapting MRP
4 Case Application
5 Maintenance Management Information Systems: Design Specifications
6 Concluding Remarks
Jumlah Halaman : 176
Kualitas ebook : Good
Kode : PM-020
Harga : Rp. 30.000 Read More/Selengkapnya......

Estimating Building Costs

1 Introduction
2 Types of Estimates
3 Estimating the Cost of Materials
4 Estimating the Cost of Labor
5 Estimating the Cost of Construction Equipment
6 The Bidding Process
7 Site Work
8 Concrete
9 Masonry
10 Metals
11 Wood
12 Thermal and Moisture Protection
13 Doors and Windows
14 Finishes
15 Mechanical Work
16 Electrical Work
17 Jobsite Overhead
18 Surety Bonds, Insurance, and Taxes
19 General Overhead, Contingencies, and Pro?t
Jumlah Halaman : 707
Kualitas ebook : Good
Kode : Build-012
Harga : Rp. 30.000 Read More/Selengkapnya......

ROTODYNAMIC PUMPS


1 INTRODUCTION
2 PUMP PARAMETERS
3 THEORY OF ROTODYNAMIC PUMPS
4 THEORY AND CALCULATION OF BLADE SYSTEMS IN CENTRIFUGAL PUMP
5 SPIRAL CASINGS (VOLUTE CASINGS)
6 LOSSES IN PUMPS
7 AXIAL AND RADIAL THRUSt
8 MODEL ANALYSIS
9 CAVITATION IN PUMPS
10 AXIAL FLOW PUMP
11 TESTING, PERFORMANCE EVALUATION AND REGULATION OF PUMPS
12 PUMP CONSTRUCTION AND APPLICATION
13 DESIGN OF PUMP COMPONENTS
Jumlah Halaman : 5377
kualitas ebook : Good
Kode : Pompa-017
Harga : Rp 30.000 Read More/Selengkapnya......

Jumat, 10 Desember 2010

Advanced BDD Optimization

1.INTRODUCTION2. PRELIMINARIES
3.EXACTNODE MINIMIZATION
4.HEURISTIC NODE MINIMIZATION
5. PATH MINIMIZATION
6. RELATIONBETWEEN SAT AND BDDS
7. FINAL REMARKS

Jumlah Halaman :225
Kualitas ebook : Good
Kode : Optimasi-001
Harga : Rp. 25.000 Read More/Selengkapnya......

Value Engineering Mastermind


1. History of value engineering 1
2. Father of value analysis/value engineering
3. Professional societies of value engineering
4. Certification programme
5. Value engineering theory
6. Finance
7. Human relation
8. Techniques
9. Creativity techniques
10. Managerial traits
11. Solution
Jumlah Halaman : 173
Kualitas ebook : Good
Kode : VE-001
Harga : Rp. 25.000 Read More/Selengkapnya......

Geometric and Engineering Drawing


Part 1 Geometric Drawing
1 Scales
2 The Construction of Geometric Figures from Given Data
3 Isometric Projection
4 The Construction of Circles to Satisfy Given Conditions
5 Tangency
6 Oblique Projection
7 Enlarging and Reducing Plane Figures and Equivalent Areas
8 The Blending of Lines and Curves
9 Loci
10 Orthographic Projection (First Angle and Third Angle)
11 Conic Sections – the Ellipse, the Parabola, the Hyperbola
12 Intersection of Regular Solids
13 Further Orthographic Projection
14 Developments
15 Further Problems in Loci
16 Freehand Sketching
17 Some More Problems Solved by Drawing

Part 2 Engineering Drawing
18 Engineering Drawing
19 Postscript – Planning a DesignJumlah Halaman : 360
Kualitas ebook : Good
Kode : Drawing-007
Harga : Rp. 30.000 Read More/Selengkapnya......

Rabu, 08 Desember 2010

Project Management and Leadership Skills for Engineering and Construction Projects

Chapter 1 Overview of Project Management
Chapter 2 Staffing the Project Team
Chapter 3 Fundamentals of Scheduling
Chapter 4 Computer Tools for Project Management
Chapter 5 Technical, Schedule, Financial Management
Chapter 6 Cost Estimating
Chapter 7 Leadership Fundamentals
Chapter 8 Effective Communications
Chapter 9 Economic Decision Making
Chapter 10 Contract Planning Essentials
Chapter 11 Commissioning Construction Projects
Chapter 12 Case Study: Microbial Abatement of a Moldy Hotel
Jumlah Halaman : 240
Kualitas ebook : Good
Kode : MAJ-012
Harga : Rp. 30.000 Read More/Selengkapnya......

Industrial gas turbine

Chapter 1 Introduction
Chapter 2 Thermodynamics of gas turbine cycles
Chapter 3 Complex gas turbine cycle
Chapter 4 Compressors
Chapter 5 Axial turbines
Chapter 6 Gas turbine combustion
Chapter 7 Off-design performance prediction
Chapter 8 Behaviour of gas turbines during off-design operation
Chapter 9 Gas turbine performance deterioration
Chapter 10 Principles of engine control systems and transient performance

Part II Simulating the performance of a two-shaft gas turbine
Chapter 11 Simulating the effects of ambient temperature on engine performance, emissions and turbine life usage
Chapter 12 Simulating the effect of change in ambient pressure on engine performance
Chapter 13 Simulating the effects of engine component deterioration on engine performance
Chapter 14 Power augmentation
Chapter 15 Simulation of engine control system performance

Part III Simulating the performance of a single-shaft gas turbine
Chapter 16 Simulating the effects of ambient temperature on engine performance, emissions and turbine life usage
Chapter 17 Simulating the effect of change in ambient pressure on engine performance
Chapter 18 Simulating the effects of engine component deterioration on engine performance
Chapter 19 Power augmentation
Chapter 20 Simulation of engine control system performance
Chapter 21 Simulation exercises

Jumlah Halaman : 224
Kualitas ebook : Good
Kode : Turbin-007
Harga : Rp. 30.000 Read More/Selengkapnya......

VALUE MANAGEMENT IN DESIGN AND CONSTRUCTION

Part One— The Development and Principles of North American Value Engineering
1 Introduction to value management
2 North American value engineering principles


Part Two— The Practice of North American Value Engineering
3 North American value engineering practice
4 North American project case studies
5 North American client implementation case studies
6 A case study of a North American value engineering consultancy practice

Part Three— An Analysis, Critique and Evaluation of North American Value Engineering
7 A critique of North American value engineering
8 Project economics and the client value system

Part Four— A Proposal for a UK Implementation of value management
9 Functional analysis method
10 Life-cycle costing
11 Group dynamics and team skills
12 A proposed UK methodology
13 Key issues for practice
Jumlah Halaman : 120
Kualitas ebook : good
Kode : Kontruksi-011
Harga : Rp. 20.000 Read More/Selengkapnya......

Jumat, 03 Desember 2010

CONTROL VALVE HANDBOOK

The Control Valve Handbook has been a primary reference for more than 30 years.
This third edition is a complete revision and update that includes vital information on control valve performance and the latest technologies.
Chapter 1 offers an introduction to control valves including definitions for common control valve and instrumentation terminology.
Chapter 2 develops the vital topic of control valve performance.
Chapter 3 covers valve and actuator types.
Chapter 4 describes digital valve controllers, analog positioners, boosters, and other control valve accessories.
Chapter 5 is a comprehensive guide to selecting the best control valve for an application.
Chapter 6 covers the selection and use of special control valves.
Chapter 7 covers desuperheaters, steam conditioning valves, and turbine bypass systems.
Chapter 8 offers typical control valve installation and maintenance procedures.
Chapter 9 includes information on control valve standards and approval agencies throughout the world.
Chapter 10 offers useful tables of engineering reference data.
Chapter 11 includes piping reference data.
Chapter 12 is a handy resource for common conversions.
Jumlah Halaman : 295
Kualitas ebook : Good
Kode : Valve-004
Harga : Rp. 30.000 Read More/Selengkapnya......

concrete structures


Chapter 1. Understanding concrete
Chapter 2. Evaluating concrete in concrete structures
Chapter 3. Causes of distress and deterioration of concrete
Chapter 4. Planning and design of concrete repair
Chapter 5. Concrete removal and preparation for repair
Chapter 6. Materials and methods for repair and rehabilitation
Chapter 7. Maintenance of concrete
Chapter 8. Specialized repairs
Chapter 9. Troubleshooting defects in concrete
Chapter 10. Worksite safety
Chapter 11. First aid
Chapter 12. Working with the concrete code
Chapter 13. Test your code knowledge
Chapter 14. Construction code highlightsJumlah Halaman : 251
Kualitas ebook : Good
Kode : Kontruksi Gedung-008
Harga : Rp. 35.000 Read More/Selengkapnya......

Professional Practice for Landscape Architects

1 Landscape practice
2 Liability and the law
3 Planning legislation
4 Environmental legislation
5 Tendering
6 Contract and contract administration
7 The JCLI Agreement
Jumlah Halaman : 308
Kualitas ebook : Good
Kode : Archi-002
Harga : Rp. 30.000 Read More/Selengkapnya......

Fundamentals of THERMOPHOTOVOLTAIC ENERGY CONVERSION

Chapter 1 – Introduction
Chapter 2 – Maximum Efficiency and Power Density for TPV Energy Conversion
Chapter 3 – Emitter Performances
Chapter 4 – Optical Filters for Thermophotovoltaics
Chapter 5 – Photovoltaic Cells
Chapter 6 – Governing Equations for Radiation Fluxes in Optical Cavity
Chapter 7 – Radiation Losses in Optical Cavity
Chapter 8 – TPV System Performance
531 Read More/Selengkapnya......

Practical Guide to Rotational Moulding



Chapter 1 – Introduction to the Rotational Moulding Process
Chapter 2 - Moulds
Chapter 3 – Rotational Moulding Machinery
Chapter 4 – Materials for Rotational Moulding
Chapter 5 – Quality Control in Rotational Moulding
Chapter 6 – The Future for Rotational Moulding
Jumlah Halaman : 188
Kualitas ebook : Good
Kode : Mold-007
Harga : Rp. 30.000 Read More/Selengkapnya......

Thermal Design of Electronic Equipment


Chapter 1 Introduction to Thermal Design of Electronic Equipment
Chapter 2 Formulas for Conductive Heat Transfer
Chapter 3 Fluid Dynamics for Electronic Equipment
Chapter 4 Convection Heat Transfer in Electronic Equipment
Chapter 5 Radiation Heat Transfer in Electronic Equipment
Chapter 6 Heat Transfer with Phase Change
Chapter 7 Combined Modes of Heat Transfer for Electronic Equipment

Jumlah Halaman : 400
Kualitas ebook : Good
Kode : elektronik-011/Perpan-007
Harga : Rp. 30.000 Read More/Selengkapnya......

Close-Up and Macro Photography


Chapter 1: Introduction
Chapter 2: Image Capture
Chapter 3: Lenses
Chapter 4: Camera Supports
Chapter 5: Lighting
Chapter 6: The Macro Studio
Chapter 7: Workflow and Image Processing
Chapter 8: Subject Gallery
Jumlah Halaman : 189
Kualitas ebook : Good
Kode : Photo-004
Harga : Rp. 30.000 Read More/Selengkapnya......

Rabu, 01 Desember 2010

Production Systems Engineering

1 Finding a Better Method for Manufacturing System Design
2 Results from Initial Studies
3 Real-World Applications Lead to Enhanced Understanding
4 Stochastic Analyses Added to Deterministic Results
5 Initial Look at System Configurations
6 Multiple Disparate Products Produced by One System
7 World-Class Versus Mostly Manual Systems
Appendices
A Determining Allowable Investment
B Economic–Technological Synthesis of Systems
C Establishing Task Data for Assembly Systems
D Simultaneous Improvement in Yield and Cycle-Time
E Two Case Study Summaries
F Advanced System Design Procedure
Jumlah Halaman : 256
Kualitas ebook : Good
Kode : PS-001
Harga : Rp. 25.000 Read More/Selengkapnya......

WASTEWATER SOLIDS INCINERATION SYSTEMS

Chapter 1 Introduction
Chapter 2 Safety
Chapter 3 Permitting and Emissions Regulations
Chapter 4 Combustion Theory
Chapter 5 Combustion Technology
Chapter 6 Heat Recovery and Reuse
Chapter 7 Emissions Control and Monitoring
Chapter 8 Ash Handling and Recycling
Chapter 9 Instrumentation and Control
Chapter 10 Incinerator Operations
Chapter 11 Incinerator Maintenance
Jumlah Halaman : 399
Kualitas ebook : Good
Kode : water-004
Harga : Rp. 25.000 Read More/Selengkapnya......

Textbook of Engineering Drawing

CHAPTER-1 Drawing Instruments and Accessories
CHAPTER-2 Lettering and Dimensioning Practices
CHAPTER-3 Scales
CHAPTER-4 Geometrical Constructions
CHAPTER-5 Orthographic Projections
CHAPTER-6 Projection of Solids
CHAPTER-7 Development of Surfaces
CHAPTER-8 Intersection of Surfaces
CHAPTER-9 Isometric Projection
CHAPTER-10 Oblique and Persepctive Projections
CHAPTER-11 Conversion of Isometric Views to Orthographic Views and Vice Versa
CHAPTER-12 Sections of Solids
CHAPTER-13 Freehand Sketching
CHAPTER-14 Computer Aided Design and Drawing (CADD)
Jumlah Halaman : 377
Kualitas ebook : Good
Kode : Drawing-006
Harga : Rp. 25.000 Read More/Selengkapnya......

Power System Analysis


1 Introduction
2 Graph Theory
3 Incidence Matrices
4 Building of Network Matrices
5 Power Flow Studies
6 Short Circuit Analysis
7 Unbalanced Fault Analysis
8 Power System Stability

Jumlah Halaman : 336
Kualitas ebook : Good
Kode : Power-001
Harga : Rp. 30.000 Read More/Selengkapnya......

Digital Photography

Daftar isi ebook ini
1. Digital cameras
2. Asset management
3. Exposure
4. Framing the image
5. Creative controls
6. Light
7. Lighting on location
8. Post-production editing
9. Printing
10. Landscape
11. Environmental portraits
12. The photographic essay
Jumlah Halaman : 247
Kualitas ebook : Good
Kode : Photo-003
Harga : Rp. 30.000 Read More/Selengkapnya......

Sabtu, 27 November 2010

ANATOMY OF A ROBOT



Chapter 1 Project Management
Chapter 2 Control Systems
Chapter 3 Computer Hardware
Chapter 4 Reliability, Safety, and Compliance
Chapter 5 Design Steps: HLD
Chapter 6 Energy and Power Systems
Chapter 7 Energy Control and Software
Chapter 8 Digital Signal Processing (DSP)
Chapter 9 Communications 2
Chapter 10 Motors and Actuators
Chapter 11 Mechanics

Jumlah Halaman : 321
Kualitas ebook : Good
Kode : Robotika-003
Harga : Rp 25.000 Read More/Selengkapnya......

Analisa Matrik Dari Dinamika Struktur

1 Characteristics of Free and Forced Vibrations of Elementary Systems
2 Eigensolution Techniques and Undamped Response Analysis of Multiple-Degree-of-Freedom Systems
3 Eigensolution Methods and Response Analysis for Proportional and Nonproportional Damping
4. Dynamic Stiffness and Energy Methods for Distributed Mass Systems
5 Dynamic Stiffness Method for Coupling Vibration, Elastic Media and P-A Effect
6 Consistent Mass Method for Frames and Finite Elements
7 Numerical Integration Methods and Seismic Response Spectra for Single-and Multi-Component Seismic Input
8 Formulation and Response Analysis of Three-Dimensional Building Systems with Walls and Bracings
9 Various Hysteresis Models and Nonlinear Response Analysis
10 Static and Dynamic Lateral-Force Procedures and Related Effects in Building Codes of UBC-94, UBC-97 and IBC-2000
Jumlah Halaman : 1017
Kualitas ebook : Good
Kode : DINSTRUK-005
Harga : Rp. 30.000 Read More/Selengkapnya......

High-Performance Concrete

Daftar isi ebook
1 Terminology: some personal choices
2 Introduction
3 A historical perspective
4 The high-performance concrete rationale
5 High-performance concrete principles
6 Review of the relevant properties of some ingredients of high-performance concrete
7 Materials selection
8 High-performance mix design methods
9 Producing high-performance concrete
10 Preparation for concreting: what to do, how to do it and when to do it
11 Delivering, placing and controlling high-performance concrete
12 Curing high-performance concrete to minimize shrinkage
13 Properties of fresh concrete
14 Temperature increase in high-performance concrete
15 Testing high-performance concrete
16 Mechanical properties of high-performance concrete
17 The durability of high-performance concrete
18 Special high-performance concretes
19 Ultra high-strength cement-based materials
20 A look ahead

Jumlah Halaman : 621
Kualitas ebook : Good
Kode : Earth Quake-003
Harga : Rp. 30.000 Read More/Selengkapnya......

Creative Close -Ups Digital Photography Tips & Techniques


Introduction
Worlds of wonder
Getting close
Photographing flowers
Universe in a grain of sand
Close-ups in the studio

Jumlah Halaman : 243
Kualitas ebook : Good
Kode : Photo-002
Harga : Rp. 30.000 Read More/Selengkapnya......

SEISMIC DESIGN OF REINFORCED AND PRECAST CONCRETE BUILDINGS


1 BASIC CONCEPTS
2 COMPONENT BEHAVIOR AND DESIGN
3 SYSTEM DESIGN
4 DESIGN CONFIRMATION
Jumlah Halaman : 834
Kualitas ebook : Good
Kode : Earth Quake-002
Harga : Rp. 30.000 Read More/Selengkapnya......

ENERGY RECOVERY



Chapter 1 Biogas Recovery from Landfills
Chapter 2 Landfill Gas: Generation Models and Energy Recovery
Chapter 3 Energy and Material Recovery from Biomass: The Biorefinery Approach. Concept Overview and Environmental Evaluation
Chapter 4 Pinch Technology for Waste Heat Recovery Applications in Oil Industry
Chapter 5 Treatment of Secondary Sludge for Energy Recovery
Chapter 6 Energy Recovery from Waste: Comparison of different Technology Combinations
Chapter 7 Energy Recovery from Waste Incineration: Linking the Systems of Energy and Waste Management
Chapter 8 Experimental Analysis of a Combined Recovery System
Chapter 9 Energy Recovery Systems from Industrial Plant Waste: Planning of an Industrial Park Located in the South of Italy

Jumlah Halaman : 343
Kualitas ebook : Good
Kode : Energi-002
Harga : Rp. 20.000 Read More/Selengkapnya......

Life Cycle Costing for Engineers


Chapter 1. Introduction
Chapter 2. Life Cycle Costing Economics .
Chapter 3 Life Cycle Costing Fundamentals
Chapter 4 Life Cycle Cost Models and Cost Estimation Methods
Chapter 5 Reliability, Quality, Safety, and Manufacturing Costing
Chapter 6 Maintenance, Maintainability, Usability and Warranty Costing
Chapter 7 Computer System Life Cycle Costing
Chapter 8 Transportation System Life Cycle Costing
Chapter 9 Civil Engineering Structures and Energy Systems Life Cycle Costing
Chapter 10 Miscellaneous Cost Estimation Models
Chapter 11 Introduction to Engineering Reliability and Maintainability
Jumlah Halaman : 224
Kualitas ebook : Good
Kode : LCC-001
Harga : Rp. 30.000 Read More/Selengkapnya......

Langford’sBasic Photography


Chapter 1.What is photography?
Chapter 2.Light: how images are formed
Chapter 3.Lenses: controlling the image
Chapter 4.Cameras using ?lm
Chapter 5.Using different focal length lenses,camera kits
Chapter 6.Digital cameras
Chapter 7.Lighting: principles and equipment
Chapter 8.Organising the picture
Chapter 9.Films, ?lters
Chapter 10.Exposure measurement
Chapter 11.Film processing
Chapter 12.Black and white printing: facilities and equipment
Chapter 13.Black and white printing: techniques
Chapter 14.The digital image: post-production
Chapter 15.Finishing and presenting work

Jumlah Halaman : 482
Kualitas ebook : Good
Kode : Photo-001
Harga : Rp. 30.000 Read More/Selengkapnya......

Rabu, 24 November 2010

Jumlah Halaman : 326
Kualitas ebook : Good
Kode : Drawing-005
Harga : Rp. 25.000

Read More/Selengkapnya......

Handbook of Reliability, Availability,Maintainability and Safety in Engineering Design

Part I Engineering Design Integrity Overview
1 Design IntegrityMethodology
2 Design Integrity and Automation
3 Reliability and Performance in Engineering Design
4 Availability and Maintainability in Engineering Design
5 Safety and Risk in Engineering Design
Jumlah Halaman : 842
Kualitas ebook : Good
Kode : PM-019
Harga : Rp. 30.000 Read More/Selengkapnya......

Fiber Optics

CHAPTER 1  THE ORIGINS OF FIBER OPTIC COMMUNICATION
CHAPTER 2 BASICS OF FIBER OPTICS
CHAPTER 3 FIBER OPTIC NETWORKS
CHAPTER 4 OPTICAL FIBER CABLES
CHAPTER 5 SPECIFYING FIBER OPTIC CABLE
CHAPTER 6 FIBER OPTIC CONNECTORS, SPLICES AND TOOLS
CHAPTER 7 FIBER OPTIC HARDWARE
CHAPTER 8 GETTING STARTED IN FIBER OPTICS
CHAPTER 9 GUIDELINES FOR FIBER OPTIC DESIGN AND INSTALLATION
CHAPTER 10 CABLE PLANT LINK LOSS BUDGET ANALYSIS
CHAPTER 11 FIBER OPTIC INSTALLATION SAFETY
CHAPTER 12 PLANNING THE INSTALLATION
CHAPTER 13 FIBER OPTIC CABLE PLANT DOCUMENTATION
CHAPTER 14 ESTIMATING AND BIDDING FIBER OPTIC INSTALLATION
CHAPTER 15 FIBER OPTIC CABLE PULLING
CHAPTER 16 FIBER OPTIC RESTORATION
CHAPTER 17 FIBER OPTIC TESTING
Jumlah Halaman : 236 Kualitas ebook : Good
Kode : FO-003
Harga : Rp. 30.000 Read More/Selengkapnya......

HANDBOOK OF OPTICS

Part 1. Measurements
Part 2. Atmospheric Optics
PART 3. Modulators
Part 4. Fiber Optics
PART 5. X-Ray and Neutron Optics
Daftar isi lengkap kirim email ke bisnis.ebook2010@gmail.com
Jumlah Halaman : 1239
Kualitas ebook : Good
Kode : FO-003
Harga : Rp. 30.000 Read More/Selengkapnya......

AIRPORT DESIGN AND OPERATION

1  AIR TRANSPORT AND AIRPORTS
2  PREDICTING TRAFFIC
3  AIRPORT SITE SELECTION AND RUNWAY SYSTEM ORIENTATION
4  RUNWAYS 
5  RUNWAY STRIPS AND OTHER AREAS
6  TAXIWAYS
7  APRONS
8  PAVEMENTS
9  AIRCRAFT GROUND HANDLI
10  AIRCRAFT REFUELLING
11  CARGO
12  PASSENGER TERMINALS
13  SECURITY
14  LANDSIDE ACCESS
15  VISUAL AIDS FOR NAVIGATION
16  ELECTRICAL ENERGY SUPPLY
17  RADIO NAVIGATION AIDS
18  AIRPORT WINTER OPERATION
19  AIRPORT EMERGENCY SERVICES
20  ENVIRONMENTAL CONTROL
Jumlah Halaman : 539
Kualitas ebook : Good
Kode : TRP-001
Harga : Rp. 30.000 Read More/Selengkapnya......

Kamis, 18 November 2010

Protective Coatings for Turbine Blades

Chapter 1: Introduction
Chapter 2: Choosing Optimum Coatings for Modern Aircraft Engine Turbine Blades
Chapter 3: Technological Processes for Deposition of Protective Coatings to Turbine Blades
Chapter 4: Phase Composition and Structure of Coatings on Superalloys
Chapter 5: Phase and Structural Changes in Coatings during High-Temperature Tests
Chapter 6: Turbine Blade Coating Protective Properties
Chapter 7: The Effect of Protective Coatings on the Mechanical Properties of Superalloys
Chapter 8: Electron Beam Thermal Barrier Coatings
Chapter 9: Some Principles of Strength Designing for Turbine-Blade Protective Coatings

Jumlah Halaman : 231
Kualitas ebook : Good
Kode : Turbin-006
Harga : Rp. 30.000 Read More/Selengkapnya......

Gas Turbine Engineering Handbook

Part I Design:Theory and Practice
1 An Overview of Gas Turbines
2 Theoretical and Actual Cycle Analysis
3 Compressor and Turbine Performance Characteristic
4 Performance and Mechanical Standards
5 Rotor Dynamics
6 Centrifugal Compressors
7 Axial-Flow Compressors
8 Radial-In?owTurbines
9 Axial-FlowTurbines
10 Combustors
11 Materials
12 Fuels
13 Bearings and Seals
14 Gears
15 Lubrication
16 Spectrum Analysis
17 Balancing
18 Couplings and Alignment
19 Control Systems and Instrumentation
20 Gas Turbine Performance Test
21 Maintenance Techniques
22 Case Histories
Jumlah Halaman : 955
Kualitas ebook : Good
Kode : Turbin-005
Harga : Rp. 30.000 Read More/Selengkapnya......

Practical Engineering Failure Analysis

1 Introduction
2 Engineering Design–Fabrication–Performance
3 Principles of Mechanics
4 Property Evaluation
5 Stress Analysis
6 Macroscopic Aspects of Fracture and Fracture Mechanics
7 Structure of Engineering Alloys
8 Materials Characterization
9 Corrosion
10 Metallurgical Aspects of Fracture and Fractography
11 Failure Analysis Procedure
12 Case Studies
Jumlah Halaman : 616
Kualitas ebook : Good
Kode : FA-001
Harga : Rp. 30.000 Read More/Selengkapnya......

Introduction to Plastics Recycling

1. Introduction
2. Back to Basics
3. The Effects of Processing on Thermoplastics
4. Why Plastics Need to be Sorted
5. Reprocessing of Thermoplastic Recyclates
6. Processing Techniques
7. Additives for Recyclates
8. Other Methods of Recycling and Waste Disposal Options
9. Creation of a Recycling and Recovery Infrastructure for Plastics
10. The Problem in Perspective: Europe
11. Rise of the Biopolymers: Recycling versus Degradation
Jumlah Halaman : 180
Kualitas ebook : Good
Kode : Mold-006
Harga : Rp. 30.000 Read More/Selengkapnya......